Back

Suspended Floor Slab

Insulation Installation Instructions

1. Fix battens or similar (25mm minimum) to underside of concrete slab at 600-1200mm centres.
2. Place sheet of Foilboard^® up against battens/channel.
3. Fix sheet to battens/channel using recommended fixings.
4. Butt join and tape sheets to create a thermal break.

Instructions are a guideline only and should be interpreted with consideration for the specific building application. Alternative installation methods may be used provided the airspaces adjacent to the Foilboard^® are maintained and the material is non load bearing. All Penetrations must be effectively sealed to reduce any risk of damage caused by possible exposure to extreme radiant heat. Please contact Foilboard Australia Pty Ltd for further information. Safe installation practices are encouraged at all times.

Handling and Storage

It is recommend that if the product is being stored for extended periods it should be kept clean and dry. Any moisture present between sheets should be dried to prevent potential oxidization and must not be stored with either foil surface in contact with any alkaline materials.

State
Postcode/Suburb

select

Pre Cut Foilboard
Underfloor pre-cut is now available across our entire range.
[ more ]
Foilboard wall insulation panels shine in Myer redevelopment
When the architects designing the massive $325 million Myer redevelopment in Melbourne considered their options for wall insulation, they chose the very best insulation product available – the Foilboard® Insulation Panel.
[ more ]

Commercial Insulation

Concrete Walls

Concrete Walls (dual RFL)